Numerical setup

import jetset
print('tested on jetset',jetset.__version__)

tested on jetset 1.2.2

Changing the grid size for the electron distribution

from jetset.jet_model import Jet
my_jet=Jet(name='test',electron_distribution='lppl',)
my_jet.show_model()

--------------------------------------------------------------------------------
model description:
--------------------------------------------------------------------------------
type: Jet
name: test

electrons distribution:
 type: lppl
 gamma energy grid size:  201
 gmin grid : 2.000000e+00
 gmax grid : 1.000000e+06
 normalization:  True
 log-values:  False
 ratio of cold protons to relativistic electrons: 1.000000e-01

radiative fields:
 seed photons grid size:  100
 IC emission grid size:  100
 source emissivity lower bound :  1.000000e-120
 spectral components:
   name:Sum, state: on
   name:Sync, state: self-abs
   name:SSC, state: on
external fields transformation method: blob

SED info:
 nu grid size jetkernel: 1000
 nu size: 500
 nu mix (Hz): 1.000000e+06
 nu max (Hz): 1.000000e+30

flux plot lower bound   :  1.000000e-30

--------------------------------------------------------------------------------

Table length=12

model name	name	par type	units	val	phys. bound. min	phys. bound. max	log	frozen
test	R	region_size	cm	5.000000e+15	1.000000e+03	1.000000e+30	False	False
test	R_H	region_position	cm	1.000000e+17	0.000000e+00	--	False	True
test	B	magnetic_field	gauss	1.000000e-01	1.000000e-10	1.000000e+10	False	False
test	NH_cold_to_rel_e	cold_p_to_rel_e_ratio		1.000000e-01	0.000000e+00	--	False	True
test	beam_obj	beaming	lorentz-factor*	1.000000e+01	1.000000e-04	1.000000e+04	False	False
test	z_cosm	redshift		1.000000e-01	0.000000e+00	--	False	False
test	gmin	low-energy-cut-off	lorentz-factor*	2.000000e+00	1.000000e+00	1.000000e+09	False	False
test	gmax	high-energy-cut-off	lorentz-factor*	1.000000e+06	1.000000e+00	1.000000e+15	False	False
test	N	emitters_density	1 / cm3	1.000000e+02	0.000000e+00	--	False	False
test	gamma0_log_parab	turn-over-energy	lorentz-factor*	1.000000e+04	1.000000e+00	1.000000e+09	False	False
test	s	LE_spectral_slope		2.000000e+00	-1.000000e+01	1.000000e+01	False	False
test	r	spectral_curvature		4.000000e-01	-1.500000e+01	1.500000e+01	False	False

--------------------------------------------------------------------------------

It is possible to change the size of the grid for the electron distributions. It is worth noting that at lower values of the grid size the speed will increase, but it is not recommended to go below 100.

The actual value of the grid size is returned by the Jet.gamma_grid_size()

print (my_jet.gamma_grid_size)

201

and this value can be changed using the method Jet.set_gamma_grid_size(). In the following we show the result for a grid of size=10, as anticipated the final integration will be not satisfactory

my_jet.set_gamma_grid_size(10)
my_jet.eval()
sed_plot=my_jet.plot_model()
sed_plot.setlim(x_min=1E8,y_min=1E-20,y_max=1E-12)

my_jet.set_gamma_grid_size(100)
my_jet.eval()
sed_plot=my_jet.plot_model()
sed_plot.setlim(x_min=1E8,y_min=1E-20,y_max=1E-12)

Changing the grid size for the IC process spectra

in the current version there is a limit of the size to 1000

my_jet=Jet(name='test',electron_distribution='lppl',)
my_jet.show_model()

--------------------------------------------------------------------------------
model description:
--------------------------------------------------------------------------------
type: Jet
name: test

electrons distribution:
 type: lppl
 gamma energy grid size:  201
 gmin grid : 2.000000e+00
 gmax grid : 1.000000e+06
 normalization:  True
 log-values:  False
 ratio of cold protons to relativistic electrons: 1.000000e-01

radiative fields:
 seed photons grid size:  100
 IC emission grid size:  100
 source emissivity lower bound :  1.000000e-120
 spectral components:
   name:Sum, state: on
   name:Sync, state: self-abs
   name:SSC, state: on
external fields transformation method: blob

SED info:
 nu grid size jetkernel: 1000
 nu size: 500
 nu mix (Hz): 1.000000e+06
 nu max (Hz): 1.000000e+30

flux plot lower bound   :  1.000000e-30

--------------------------------------------------------------------------------

Table length=12

model name	name	par type	units	val	phys. bound. min	phys. bound. max	log	frozen
test	R	region_size	cm	5.000000e+15	1.000000e+03	1.000000e+30	False	False
test	R_H	region_position	cm	1.000000e+17	0.000000e+00	--	False	True
test	B	magnetic_field	gauss	1.000000e-01	1.000000e-10	1.000000e+10	False	False
test	NH_cold_to_rel_e	cold_p_to_rel_e_ratio		1.000000e-01	0.000000e+00	--	False	True
test	beam_obj	beaming	lorentz-factor*	1.000000e+01	1.000000e-04	1.000000e+04	False	False
test	z_cosm	redshift		1.000000e-01	0.000000e+00	--	False	False
test	gmin	low-energy-cut-off	lorentz-factor*	2.000000e+00	1.000000e+00	1.000000e+09	False	False
test	gmax	high-energy-cut-off	lorentz-factor*	1.000000e+06	1.000000e+00	1.000000e+15	False	False
test	N	emitters_density	1 / cm3	1.000000e+02	0.000000e+00	--	False	False
test	gamma0_log_parab	turn-over-energy	lorentz-factor*	1.000000e+04	1.000000e+00	1.000000e+09	False	False
test	s	LE_spectral_slope		2.000000e+00	-1.000000e+01	1.000000e+01	False	False
test	r	spectral_curvature		4.000000e-01	-1.500000e+01	1.500000e+01	False	False

--------------------------------------------------------------------------------

my_jet.eval()
sed_plot=my_jet.plot_model()
sed_plot.setlim(x_min=1E8,y_min=1E-20,y_max=1E-12)

To get a better sampling of the IC cut-off you can increase the IC emission grid size

my_jet.set_IC_nu_size(200)

my_jet.eval()
sed_plot=my_jet.plot_model()
sed_plot.setlim(x_min=1E8,y_min=1E-20,y_max=1E-12)

Changing the grid size for the seed photons

my_jet=Jet(name='test',electron_distribution='lppl',)
my_jet.show_model()

--------------------------------------------------------------------------------
model description:
--------------------------------------------------------------------------------
type: Jet
name: test

electrons distribution:
 type: lppl
 gamma energy grid size:  201
 gmin grid : 2.000000e+00
 gmax grid : 1.000000e+06
 normalization:  True
 log-values:  False
 ratio of cold protons to relativistic electrons: 1.000000e-01

radiative fields:
 seed photons grid size:  100
 IC emission grid size:  100
 source emissivity lower bound :  1.000000e-120
 spectral components:
   name:Sum, state: on
   name:Sync, state: self-abs
   name:SSC, state: on
external fields transformation method: blob

SED info:
 nu grid size jetkernel: 1000
 nu size: 500
 nu mix (Hz): 1.000000e+06
 nu max (Hz): 1.000000e+30

flux plot lower bound   :  1.000000e-30

--------------------------------------------------------------------------------

Table length=12

model name	name	par type	units	val	phys. bound. min	phys. bound. max	log	frozen
test	R	region_size	cm	5.000000e+15	1.000000e+03	1.000000e+30	False	False
test	R_H	region_position	cm	1.000000e+17	0.000000e+00	--	False	True
test	B	magnetic_field	gauss	1.000000e-01	1.000000e-10	1.000000e+10	False	False
test	NH_cold_to_rel_e	cold_p_to_rel_e_ratio		1.000000e-01	0.000000e+00	--	False	True
test	beam_obj	beaming	lorentz-factor*	1.000000e+01	1.000000e-04	1.000000e+04	False	False
test	z_cosm	redshift		1.000000e-01	0.000000e+00	--	False	False
test	gmin	low-energy-cut-off	lorentz-factor*	2.000000e+00	1.000000e+00	1.000000e+09	False	False
test	gmax	high-energy-cut-off	lorentz-factor*	1.000000e+06	1.000000e+00	1.000000e+15	False	False
test	N	emitters_density	1 / cm3	1.000000e+02	0.000000e+00	--	False	False
test	gamma0_log_parab	turn-over-energy	lorentz-factor*	1.000000e+04	1.000000e+00	1.000000e+09	False	False
test	s	LE_spectral_slope		2.000000e+00	-1.000000e+01	1.000000e+01	False	False
test	r	spectral_curvature		4.000000e-01	-1.500000e+01	1.500000e+01	False	False

--------------------------------------------------------------------------------

we can get the current value of the seed photons grid size using attribute Jet.nu_seed_size()

in the current version there is lit of the size to 1000

print (my_jet.nu_seed_size)

100

and this value can be changed using the method Jet.set_seed_nu_size(). In the following we show the result for a grid of nu_size=10

my_jet.nu_seed_size=10
my_jet.eval()
sed_plot=my_jet.plot_model()
sed_plot.setlim(x_min=1E8,y_min=1E-20,y_max=1E-12)

my_jet=Jet(name='test',electron_distribution='lppl',)
my_jet.show_model()

--------------------------------------------------------------------------------
model description:
--------------------------------------------------------------------------------
type: Jet
name: test

electrons distribution:
 type: lppl
 gamma energy grid size:  201
 gmin grid : 2.000000e+00
 gmax grid : 1.000000e+06
 normalization:  True
 log-values:  False
 ratio of cold protons to relativistic electrons: 1.000000e-01

radiative fields:
 seed photons grid size:  100
 IC emission grid size:  100
 source emissivity lower bound :  1.000000e-120
 spectral components:
   name:Sum, state: on
   name:Sync, state: self-abs
   name:SSC, state: on
external fields transformation method: blob

SED info:
 nu grid size jetkernel: 1000
 nu size: 500
 nu mix (Hz): 1.000000e+06
 nu max (Hz): 1.000000e+30

flux plot lower bound   :  1.000000e-30

--------------------------------------------------------------------------------

Table length=12

model name	name	par type	units	val	phys. bound. min	phys. bound. max	log	frozen
test	R	region_size	cm	5.000000e+15	1.000000e+03	1.000000e+30	False	False
test	R_H	region_position	cm	1.000000e+17	0.000000e+00	--	False	True
test	B	magnetic_field	gauss	1.000000e-01	1.000000e-10	1.000000e+10	False	False
test	NH_cold_to_rel_e	cold_p_to_rel_e_ratio		1.000000e-01	0.000000e+00	--	False	True
test	beam_obj	beaming	lorentz-factor*	1.000000e+01	1.000000e-04	1.000000e+04	False	False
test	z_cosm	redshift		1.000000e-01	0.000000e+00	--	False	False
test	gmin	low-energy-cut-off	lorentz-factor*	2.000000e+00	1.000000e+00	1.000000e+09	False	False
test	gmax	high-energy-cut-off	lorentz-factor*	1.000000e+06	1.000000e+00	1.000000e+15	False	False
test	N	emitters_density	1 / cm3	1.000000e+02	0.000000e+00	--	False	False
test	gamma0_log_parab	turn-over-energy	lorentz-factor*	1.000000e+04	1.000000e+00	1.000000e+09	False	False
test	s	LE_spectral_slope		2.000000e+00	-1.000000e+01	1.000000e+01	False	False
test	r	spectral_curvature		4.000000e-01	-1.500000e+01	1.500000e+01	False	False

--------------------------------------------------------------------------------

print(my_jet.IC_nu_size)

100

my_jet.IC_nu_size=20
my_jet.eval()
sed_plot=my_jet.plot_model()
sed_plot.setlim(x_min=1E8,y_min=1E-20,y_max=1E-12)

my_jet.IC_nu_size=100
my_jet.eval()
sed_plot=my_jet.plot_model()
sed_plot.setlim(x_min=1E8,y_min=1E-20,y_max=1E-12)

my_jet.IC_nu_size=200
my_jet.eval()
sed_plot=my_jet.plot_model()
sed_plot.setlim(x_min=1E8,y_min=1E-20,y_max=1E-12)

my_jet._blob.IC_adaptive_e_binning
my_jet.IC_nu_size=100
my_jet.eval()
sed_plot=my_jet.plot_model()
sed_plot.setlim(x_min=1E8,y_min=1E-20,y_max=1E-12)